INJECTION CLEANING SYSTEM The patented Injection Cleaning System is the continous release of pressure through a nozzle directed at a section on the the inside of the cartridge filter. An encapsulated linear actuator moves the nozzle up and down and a gear motor rotates the ICS 360 degrees covering the cartridge filter in eight minutes. The concentrated air jet is effective at blowing dust particles off the filter. Clean, dry, oil freeze compressed air between 60-80 psi required. The ICS nozzle and distance from filter must be correlated. Any type media can be used, but must be precoated to prevent particulate from embedding into the fibers. This type of cleaning lends itself to off line pulse cleaning. Generally speaking, the more effective the cleaning system, the higher the air-to-media ratio can be. Low air-to-media ratios are usually required when loading is extremely heavy and on line pulse cleaning is required.

REVERSE PULSE CLEANING Reverse Pulse Cleaning is the quick release of pressure through a blowtube inot a cartridge filter. The air impinges against the bottom of the cartridge and deploys the immediate area. The pressure profile down the wall of the filter varies from negative (low) at the top to positive (high) at the bottom of the filter. The resulting burst of compressed air typically pressurizes the bottom third of the cartridge filter, resulting in only 10-30% actual cleaning effectiveness. Clean, dry, oil free compressed air between 90-110 psi required. The further away the blowtube is located from the cartridge intake, upto 15 inches, the better it usually performs. Any type media can be used, but must be precoated to prevent particulate from embedding inot the fibers. This type of cleaning system leands itself to on line or off line pulse cleaning.

Fax 514.631.9480
Toll Free: 1.800.361.3733
info@fredfiltration.com
www.fredfiltration.com